818 557-8403
Sony DVW-A500
Setting Time Code

1. Lift up the Front Control Panel until it is perpendicular to the deck.
2. Carefully pull Front Control Panel forward. You will see another set of buttons.
3. Set TC Generator switch to INT
4. Set the other TC Generator switch to PRESET
5. Underneath Front Control Panel, set VITC to NON DROP or DROP FRAME MODE as required
6. Set REC RUN
7. ON the Front Control Panel Press TC Button and then HOLD Button
   The first digits will begin to flash. Using the SEARCH Dial, select the digit to change. While holding down the JOG Button located on top of the SEARCH Dial, rotate the SEARCH Dial to change the value.
8. Press SET when done. The Time Code that you selected will appear on the LED Display on the Front Control Panel when you hit PLAY or Record.

THAT’S IT. YOU ARE DONE!